As the saying goes, prevention is always far better than cure, and this expression is as true as ever when it comes to taking good care of your wooden flooring.
Taking care of hardwood floors does need you to invest some time and effort, although this can help save you time, energy and money in the future.
Among the great things about most types of hardwood floors is that, if its look start to deteriorate because of stains and scratches, you are able to have it re- sanded. Re- sanding and re-finishing hardwood floors will restore its beauty- giving you a clean slate to begin again.
After restoring the appearance of your flooring, you then will need to make a promise to yourself that you won’t allow its condition deteriorate again, and that you’ll adhere to the necessary preventative measures.
These preventative measures are pretty easy to put in place, and include removing footwear at the door (especially high heeled shoes), cleaning up spills the minute they occur and placing felt pads to prevent it from producing marks.
There is plenty you can do about scratches and stains on your floors, and lots you can do to avoid themso for more information seek out an expert.
When installing your new hardwood floors, or even in the event that you employ a professional to do the job for you, you’re likely to come across a lot of conditions you haven’t ever heard of before. Not knowing these terms and abbreviations can produce the task trickier, therefore it can be helpful to do your assignments.
The following are a couple of of the most frequently used but not often understood terms related to buying and installing hardwood floors, and of course — what they mean…
• DPM — that stands for Damp Proof Membrane, that is a vapour barrier used under hardwood flooring to protect it from increasing moisture from your sub floor.
• Floating floor — this really is a floor which is not attached to its own sub floor with nails or glue. It’s a floor kind most often used with laminate floors substance.
• Burrs — those are clusters of little knots in hardwood floors which create a cats-paw like pattern
• EMC — this stands for Equilibrium Moisture Content, That’s the moisture content a substance achieves within an atmosphere in which both humidity and temperature are steady
• Tongue & Groove — this really is a method commonly utilized to install engineered and soild wood flooring, where male and female profiles on each and every floorboard lock together.
A dirty gym floor doesn’t just look bad, additionally, it is hazardous for your athletes. A flooring covered with dust, soil, and debris can cause athletes to slide, twist an ankle and get severely injured in a number of different ways. Not only that, when dirt collects on a gym floor, it dulls and marks the surface up, shortening the lifetime of your flooring and causing one to get less out of your huge investment.
That’s why it’s vital that you take the required steps to keep dirt, dust and grit off your gym. By following these simple suggestions, you are able to keep your gym floor cleaner, fitter and shinier.
Position mats at doorways: Preventative maintenance is one of the greatest steps you can take to prevent dirt out of ever getting in your gym in the first location. By placing mats at every doorway, people are going to have the ability to wash their shoes as they enter the fitness center, eliminating any dirt or other debris that they might be monitoring in. The dirt gets trapped in the mat rather than strewn across your gym floor.
Use floor covers for alternate gym uses (if available): These days, the school gym is used for far more than just sports activities. During such occasions, the floor ought to be covered with a fitness center covering to safeguard against heavy foot traffic, scuffs, stains and other damage.
Dry-mop daily: Throughout the school year, you ought to be sterile dust-mopping your health at least twice to three times every day, more often if events occur. Dust and grime is continually accumulating on the floor, therefore it needs to be washed regularly to maintain its shine and safe surface.
Deep wash per week: Once a week, the gym floor should experience a comprehensive cleaning. Ensure that you use the suggested cleaning products for your flooring kind to preserve its end.
Replace AC filters regularly: HVAC filters are designed to catch dust and dirt so that you may enjoy clean indoor air. As time passes, however, filters get dirty and that dirt and dust may escape into the atmosphere and collect on the gym floor. That is why you need to replace your filters on a regular basis, normally every few months.
These small, simple steps will keep your courtroom looking fantastic and your athletes in healthy form!!!
Solid or Engineered Wood Flooring for the Gym?
Solid wood flooring is a solid piece of wood from the top to the bottom. The thickness varies from ¾” to 5/16”. Those wood floors can be installed both above and on grade, and they can be sanded and refinished during its service life.
Engineered wood floors from other side are also real wood floors made by using multiple wood or wood composite veneers. The veneers can be from the same or from different wood species. It have a great stability because the grain of each veneer runs in different direction. This mean that the wood will resist expanding and contracting during fluctuations in humidity and temperature which is really making it wide usable. This type of flooring can also be sanded and refinished and it can be installed above, on or below grade.
Why is oil finish important?
Finishing your wooden floors is extremely important, it effect as a barrier between the natural wood and everything that it contacts with – foot traffic, pets, heavy furniture and other surface objects. It helps extend the floorboards life and helps keep your floor looking wonderful for longer time period.
Oil penetrates into the wood and accentuates both the colour and grain of the floor, whilst also making a protection layer. The molecules in the oil are small enough to seep deep down into the wood and make a strong form of protection. This also prevents the look and feel of a gloss on the surface of the floor. In addition to providing a natural outlook, oiled floors offer the chance of being spot repaired in the event of surface damage.
The colour and finish of the oils is completely up to you. Finishes include glossy, satin, semi-matt and matt. An oil finish is extremely durable and hardwearing which helps protect your wooden floors from getting used. Other positive thing for an oil finish is that it enhances the woods natural character. An oil finish protection will help your wooden floor to deal with the scratches and traffic to 10 years!
Priority for us is to provide quality floor finishing and sanding services. If you have a renovation ideas for your home or office –contact us 24/7!
MOST USED SOFTWOODS top 3
PINE: Pine is a softwood which grows in most areas of the Northern Hemisphere. There are more than 100 species worldwide.
Properties: Pine is a soft, white or pale yellow wood which is light weight, straight grained and lacks figure.It resists shrinking and swelling. Knotty pine is often used for decorative effect.
Uses: Pine is often used for country or provincial furniture. Pickled, whitened, painted and oil finishes are often used on this wood.
ASH: There are 16 species of ash which grow in the eastern United States. Of these, the white ash is the largest and most commercially important.
Properties: Ash is a hard, heavy, ring porous hardwood. It has a prominent grain that resembles oak, and a white to light brown colour. Ash can be differentiated from hickory (pecan) which it also resembles, by white dots in the darker summer wood which can be seen with the naked eye. Ash burls have a twisted, interwoven figure.
Uses: Ash is widely used for structural frames and steam bent furniture pieces. It is often less expensive than comparable hardwoods.
HICKORY: There are 15 species of hickory in the eastern United States, eight of which are commercially important.
Properties: Hickory is one of the heaviest and hardest woods available. Pecan is a species of hickory sometimes used in furniture. It has a close grain without much figure.
Uses: Wood from the hickory is used for structural parts, especially where strength and thinness are required. Decorative hickory veneers are also commonly used.
The Best Ways to Clean Hardwood Floors
-Prep your floor for cleaning by sweeping or dust-mopping to get rid of large particles of dirt and debris.
-Use a pH neutral cleaner that will be gentle on your hardwood floors.
-Use a fine spray mist to clean your floor in sections. Avoid putting too much liquid on your floors.
-Use a microfiber mop to clean. Traditional mops can work, but they can leave excess water on your floors.
-Skip using white vinegar and water to clean your floors. Using a specially formulated hardwood floor care cleaner is a smart way to maintain the beauty and look of your floors.
We would like to share with you couple of things that are expecting you at our website!
– You can book a consultation for FREE with some expert of our firm
– we work even weekends 24/7
– we also work with new machines with 99% dust free sanding
– we guarantee your satisfaction !
– You can get a free sanding quote from our webpage